The Aberdeen Pallet Guide: Grades, Sizes & ISPM15

Aberdeen is the UK's energy capital and one of Europe's biggest fishing regions, with vast catches landed for export at Peterhead and Fraserburgh. This guide covers pallet sizes, ISPM15 export rules, load ratings and loading in plain English. Aberdeen Pallets supplies graded used pallets and new pallets in bulk; the facts here apply to timber pallets anywhere.

Pallet grades explained: A, B and C

Most used pallets are sold by condition grade, so you can match quality to the job and the budget. There's no single national standard for grades, but the industry — and we — use a simple A/B/C scale:

In short: Grade A is basically new but devalued; Grade B is the everyday workhorse; and Grade C is heavily used but still does the job. See each grade on our pallet range page.

Used or new pallets: which should you buy?

For most loads a sound used pallet does the same job as new at a lower price — which is why used and reclaimed pallets make up the bulk of the market and around 80% of what we supply. A Grade A or B used pallet carries a similar load to new and is far kinder to your budget and your carbon footprint. Choose new when you specifically need a clean, uniform pallet: hygiene-critical food or pharmaceutical loads, retail presentation, or where a guaranteed specification is written into a contract. One thing worth knowing — there's no general-supply "new Euro" pallet: new EPAL pallets can only be made by EPAL-licensed manufacturers, so any Euro pallets we supply are quality used stock.

What are the standard pallet sizes?

There is no single "standard" pallet worldwide, but two sizes dominate in the UK: the 1200 × 1000 mm UK pallet and the 1200 × 800 mm Euro (EPAL) pallet. Here are the common sizes you'll encounter:

We supply the first two as standard, used and new (used only for Euro). Need another size for a specific route? Ask us.

What is an ISPM15 pallet, and do I need one?

An ISPM15 pallet is a wooden pallet that has been heat-treated to a core temperature of 56°C for at least 30 minutes and stamped with the IPPC mark. ISPM15 (International Standard for Phytosanitary Measures No. 15) exists to stop timber pests spreading between countries. If you export goods outside the UK on solid-wood packaging, that packaging almost always has to be ISPM15-compliant, or your shipment can be held or refused at the border. Good news for used-pallet buyers: a used pallet that already carries a clear, valid IPPC stamp — and hasn't been repaired with untreated wood — can be reused for export.

The IPPC stamp tells inspectors the pallet is compliant. It shows four things:

• IPPC symbol — the wheat/globe logo that identifies the scheme.
• Country code — e.g. GB for the United Kingdom.
• Producer number — the registered facility that treated the wood.
• Treatment code — HT for heat treatment (the method we use).

How much weight can a pallet hold?

Capacity depends on how the load sits. The three ratings buyers ask about are static, dynamic and racking load. A sound used pallet carries a similar load to new — grade reflects wear and appearance more than rated strength. As a general guide for a standard timber pallet:

Figures are typical industry guidance — the exact rating depends on timber, board thickness and construction. Tell us your load and we'll spec the right grade.

How many pallets fit in a lorry or container?

A useful planning rule for single-stacked, floor-loaded pallets:

Double-stacking increases these numbers wherever the load and its fragility allow.

Pallets for energy and seafood in the north-east

Aberdeen anchors the UK's offshore-energy industry and, at Peterhead and Fraserburgh, one of Europe's largest fishing fleets. Subsea and energy equipment needs heavy-duty, load-rated pallets, while seafood exporters need clean, ISPM15-compliant timber to ship abroad. Keep ISPM15 pallets for export lines; use Euro (EPAL) pallets for racked and European trade.

What are pallets made from?

Most transport pallets are softwood (typically pine or spruce), which is strong, light and cost-effective; hardwood is used where extra durability is needed. Timber is the material of choice because it's repairable, recyclable and easy to treat for export — which is exactly what makes a healthy used-pallet market possible. Board thickness, the number of bearers and the moisture content of the wood all affect strength and weight.

How are used pallets graded and reconditioned?

Every pallet that comes back to us is inspected and sorted. Sound pallets are graded A, B or C on condition; those needing work are reconditioned — reboarded, re-nailed or blocks replaced — and re-graded; and any beyond repair are dismantled for parts or chipped for reuse, so very little goes to landfill. We also run a buy-back and collection service, paying cash or credit for your surplus and damaged pallets and keeping timber in circulation.

How do I order used pallets in bulk?

Ordering with us takes five steps:

Pallet glossary

Quick answers